A reusable sediment pre-filter that catches sand and grit before it reaches your pipes, fixtures and appliances. It installs on a whole-house line or under a sink.
Features
- Spin-down design with a stainless steel 316L filter element
- Filters sediment down to 60 microns
- Flow of about 2800-3200 L/h (740-845 gal/h), depending on water pressure and pipe thickness
- Rinse clean once a month: open the drain valve for 30 seconds, close it, and repeat 3 times
- Works with municipal tap water
Specifications
| Filter size | 190 mm H x 90 mm L (7.5 x 3.5 in) |
|---|---|
| Inlet and outlet | 3/4″ male BSP (25 mm OD / 20 mm ID) + 1/2″ female BSP |
| Filtration accuracy | 60 micron |
| Pressure rating | 6 kg |
| Pressure loss | 0.5 bar or less |
| Temperature range | 5-30 °C (41-86 °F) |
| Weight | 436 g (0.96 lb) |
| Filter material | 316L stainless steel |
What’s in the box
- 1 filter
- 1 special wrench
- 1 drain pipe
- 1 mounting fixture
- 1 washer
- 1 manual
FAQ
Where can I install it?
It is made for a whole-house line or under a sink.
What thread does it use?
3/4 inch male BSP plus 1/2 inch female BSP, so check your fittings or use adapters.
How do I clean it?
Open the drain valve for 30 seconds, close it, and repeat 3 times, about once a month.






































