A 2 gallon fluid extractor pump for changing engine oil, coolant and brake fluid from the top, without crawling under the vehicle.
Features
- Two ways to pump: work the handle by hand (about 11 strokes) or connect an air compressor for vacuum mode
- 7.5 L polypropylene tank draws low viscosity fluids such as water and coolant
- 5 ft main hose connects to an extended PU hose and a brake bleeding hose
- Sealed joints on all connections help prevent leaks
- Works on cars, yachts, RVs and trucks
Specifications
| Capacity | 7.5 L (2 gallons) |
|---|---|
| Material | PP |
| Type | Manual pneumatic |
| Main hose | 5 ft |
| Operating temperature | 35 to 175 F |
What’s in the box
- 1 fluid extractor
- 5 tubes
- 1 user manual
FAQ
How does the manual oil extractor pump work?
Move the handle up and down about 11 times to build vacuum, or connect an air compressor for the automatic vacuum mode.
Can it remove brake fluid and coolant?
It draws low viscosity fluids such as oil, water and coolant, and the supplier also lists brake fluid use with a brake bleeding hose connection.
What should I not pump with it?
Avoid fluids that are highly volatile, corrosive, alkaline or very hot. Warm the engine for 5 minutes first so the oil flows.




























