This 2 in 1 tool resets the tire pressure sensors on compatible vehicles and doubles as a digital tire pressure gauge for cars, motorcycles and bicycles.
Features
- TPMS relearn: put the vehicle in learn mode, hold the antenna against the tire sidewall near the valve stem, then press the right button
- Digital display switches between PSI, bar, kPa and kgf/cm2 with the left button before you take a reading
- Pressure stays on the display after you pull the gauge off the valve
- Lets you bleed off air if a tire is over-inflated
- Auto shut-off after 30 seconds, power switch and replaceable battery
Specifications
| Pressure range | 0-150 PSI / 0-7 bar / 0-700 kPa / 0-7 kgf/cm2 |
|---|---|
| Increments | 0.05 |
| Sensor frequency | 315 MHz and 433 MHz |
| Compatibility | Most General Motors vehicles with 315/433 MHz sensors |
| Power | 9V battery, not included |
| Auto shut-off | 30 seconds |
| Gauge works on | Cars, motorcycles and bicycles |
What’s in the box
- TPMS relearn tool and gauge
FAQ
Which vehicles does this TPMS relearn tool work on?
It is listed for most General Motors vehicles with 315 or 433 MHz sensors. Check your vehicle before ordering.
Does it come with a battery?
No. It needs a new 9V battery, which is not included.
Can I use it as a tire pressure gauge only?
Yes. Hold the left head on the valve and the reading stays on the display after you remove it.































