A wall holder for a handheld shower head that mounts with an adhesive plate and holds the head at one of two angles.
Features
- Two fixed angles, adjusted quickly
- Fits most standard handheld shower heads with hose nuts up to 0.85 inch (21.5 mm); some oversized nuts may not fit
- Turn the handle 90 degrees to loosen the bracket, move it, then turn back to secure
- Made for flat, smooth walls; textured walls hold less well
- Clean and dry the wall, press the plate on firmly and let it set for 72 hours before mounting
- Removable: warm the plate with a hair dryer for 1-2 minutes, then lift it with a flat screwdriver
Specifications
| Mount | Adhesive plate |
|---|---|
| Angle positions | 2 fixed angles |
| Hose nut fit | Up to 0.85″ (21.5 mm) |
| Finish | Brushed nickel |
| Setting time before use | 72 hours |
| Installation | No tools required |
FAQ
Will it fit my shower hose?
It fits most standard handheld shower heads with hose nuts up to 0.85 inch (21.5 mm). Measure yours first, since oversized nuts may not fit.
How long should I wait before mounting the bracket?
Let the adhesive plate set for 72 hours on a clean, dry wall first.
How do I remove the adhesive plate later?
Heat it with a hair dryer for 1-2 minutes, then slide a flat screwdriver under the edge to lift it.








































