This valve keeper remover and installer lets you take off and refit valve springs without pulling the cylinder head, and it suits most overhead valve engines.
Features
- Push or tap the remover with a hammer to release the valve keepers
- Magnet in the tool body holds the keepers so they do not drop into the engine
- Spring-loaded installer tip helps align and guide the keepers during refitting
- Aluminum alloy body is listed as corrosion and rust resistant
Specifications
| Material | Aluminum alloy |
|---|---|
| Valve stem range 1 | 4.5-7.5 mm (11/64-19/64 in) |
| Valve stem range 2 | 7.9-9.5 mm (5/16-3/8 in) |
| Engines | Most overhead valve engines, including Toyota 4-cylinder and Chrysler |
What’s in the box
- 1 valve spring keeper remover and installer
FAQ
Do I have to remove the cylinder head?
No. The supplier says you can remove and install the valve spring without removing the cylinder head.
What valve stem sizes does it fit?
4.5 to 7.5 mm for Toyota 4-cylinder and Chrysler engines, and 7.9 to 9.5 mm for cars, motorcycles and boats.
How do I keep the keepers from falling into the engine?
A magnet in the tool body catches them as you remove them.




























