This gimbal bearing alignment and install kit helps you seat a new gimbal bearing straight in a boat’s bearing housing, for DIY boat owners and marine mechanics.
Features
- Bearing install adapter is held in place with heat-treated screws, set from the position of the old bearing
- 1.4 inch alignment tool rod reaches the bearing housing
- Rod and extension rod tighten without extra tools, and the threads are dense so the joints stay secure
- Detachable design takes up little storage space
- Electrophoretic anti-rust coating on every part, from the screws to the adapter
- Thicker adapter and rod are built to take hammer or chisel blows
Specifications
| Material | High-hardness steel |
|---|---|
| Coating | Electrophoretic anti-rust |
| Alignment rod diameter | 1.4 in |
| Compatible drives | Mercruiser Alpha, Alpha 1, MR, Bravo, OMC, Cobra, Volvo |
FAQ
Which marine drives is this gimbal bearing tool for?
The supplier lists Mercruiser Alpha, Alpha 1, MR and Bravo, plus OMC, Cobra and Volvo drive systems.
Do I need extra tools to put the rods together?
No. The alignment rod and extension rod use a tightening mechanism that needs no additional tools.
How should the tool go into the housing?
Insert it straight into the bearing housing. Entering too high or too low can damage internal parts.




























