This machinist square checks whether an edge is truly square using the light-gap method, with a hardened steel blade and beam ground to a stated accuracy.
Features
- Light-gap method shows any gap between the blade and the edge you are checking
- Blade is bevelled on both sides
- Beam and blade are ground and lapped for parallelism
- 30 degree knife edge on the blade
- Supplied in a protective case for the bench or toolbox
Specifications
| Material | Hardened steel |
|---|---|
| Angle | 90 degrees |
| Accuracy grade | Grade 1 |
| Squareness tolerance | 0.02-0.05 mm |
| Blade edge | 30 degree knife edge |
| Available sizes | 63, 80, 100 or 160 mm |
What’s in the box
- 1 edge square ruler
- Protective case
FAQ
How do I check an edge with a machinist square?
Hold the square against the edge and look for light between them. Even contact with no gap means the edge is square (light-gap method).
How accurate is this square?
It is accuracy grade 1, with a squareness tolerance of 0.02-0.05 mm.
Which sizes can I choose?
Four sizes are offered: 63, 80, 100 and 160 mm. Shipping is FREE from a US warehouse.































