A 4th axis rotary dividing head for CNC router and engraving machines, adding a rotating axis so you can engrave and machine around round parts.
Features
- 80 mm 3-jaw centering chuck with a set of anti-claw jaws and wrenches
- Two-phase, four-wire Nema23 stepper motor included
- 6:1 belt reduction with a 3M synchronous belt gives 0.3 degrees per step
- Gearbox output shaft is 20 mm
- Tailstock has a movable top tip and an axial locking wrench
Specifications
| Chuck | K11 80 mm 3-jaw centering chuck |
|---|---|
| Center height | 65 mm (2.56 in) |
| Total height | 115 mm (4.5 in) |
| Angle per step | 0.3 degrees |
| Reduction ratio | 6:1 (belt deceleration) |
| Synchronous belt | 3M, 336 mm long, 15 mm wide |
| Output shaft diameter | 20 mm |
| Stepper motor | Nema23, 57 mm, 3 A, 2-phase, 4-wire |
| Tailstock | 65 mm center height, 50 mm stretch distance |
| Weight | Rotary axis 5.5 kg (12.1 lb); tailstock 2.1 kg (4.6 lb) |
What’s in the box
- 4th axis unit with motor and 80 mm chuck
- 65 mm tailstock
- Anti-claw jaws and wrenches
FAQ
What chuck comes with this CNC 4th axis?
An 80 mm K11 3-jaw centering chuck, with a set of anti-claw jaws and wrenches.
How do I set the pulses per degree in Mach3?
Multiply the motor pulses per turn by the driver microstep setting and the 6:1 reduction ratio, then divide by 360 degrees.
What is the tailstock center height?
65 mm (2.56 in), matching the center height of the rotary axis.



































