A 13-piece hollow punch set for cutting clean round holes in gaskets, leather, rubber and other soft materials, with a labeled case to keep every size together.
Features
- The spring-loaded center pin retracts as you strike, so you can line up each hole before punching
- Remove the pin to cut solid discs with no center hole
- Cuts rubber, leather, vinyl, plastic, cardboard, copper and similar soft materials
- Steel heat-treated to 48-50 HRC for hard cutting edges
- To use, screw a punch onto the shaft and strike the top bolt with a hammer
Specifications
| Pieces | 13 punches |
|---|---|
| Size range | 3/16 in to 1-3/8 in (5 mm to 35 mm) |
| Material | 45# steel, heat-treated |
| Hardness | 48-50 HRC |
| Handle | Rubber-coated |
| Case | Hard case with handle, latches and labeled sizes |
| Not included | Hammer |
FAQ
What hole sizes does this hollow punch set cut?
13 sizes from 3/16 inch (5 mm) up to 1-3/8 inch (35 mm).
Do I need a hammer to use the punches?
Yes. You strike the top bolt with a hammer, which is not included.
Can I punch on concrete?
No. Use a wooden block under the work to protect the cutting edge and avoid hard surfaces like concrete.


































